Tipărire

EZ1016sc Total Hardness Analyser

Nr. produs: EZ1016.XXXXXXXT

Preț unitar Contact

Alarma: Malfunction, maintenance, analyser busy

Calibrare: Automatic, 2-point; frequency freely programmable

Calitate proba: Maximum particle size 100 µm, < 0.1 g/L; Turbidity < 50 NTU

Certiﬁcări: CE compliant / ETL certified

Clasa de protectie: IP44

Curatare automata: Da

Cuve: 10 min (dilution + 5 min.)

Debitul probei: 100 - 300 mL/min

Demineralised water: For rinsing / dilution

Digital outputs: Optional: Modbus (TCP/IP, RTU/RS485), Profinet, Profibus DP, Ethernet/IP

Dimensiuni (Înălţime x Lăţime x Adâncime): 690 mm x 465 mm x 330 mm

Domeniu de măsurare: 0,05 - 1 mg/L CaCO3

Optional (with internal dilution):
0,025 - 0,25 mg/L
0,025 - 0,5 mg/L
0,5 - 10 mg/L
1,25 - 25 mg/L
2,5 - 50 mg/L
3,75 - 75 mg/L
5,0 - 100 mg/L

0.025 - 1 mg/L CaCO₃

Earth connection: Dry and clean earth pole with low impedance (< 1 Ohm) using an earth cable of > 2.5 mm²

Esantion: presiune: By external overflow vessel

Garanţie: 24 luni

Greutate: 25 kg

Iesiri analogice: Active 4 - 20 mA max. 500 Ohm load, standard 1, max. 8 (option)

Instrument air: Dry and oil free according to ISA-S7.0.01-1996 quality standard for instrument air

Interferente: Some metal ions interfere by causing fading or indistinct end points or by stoichiometric consumption of EDTA. Large amounts of colour and turbidity interfere. Fats, oil, proteins, surfactants and tar.

Limita de detecţie: ≤ 2.5 µg/L CaCO₃

Material: Hinged part: Thermoform ABS, door: PMMA
Wall section: galvanised steel, powder coated

Metoda de măsurare: Colorimetric measurement at 610 nm using calmagite/EDTA

Model: EZ1016sc

Nr. flux probe : 1, 2, 4, or 8

Nume metoda: Colorimetric

Parametru: Total Hardness

Precizie: Better than 2% full scale range for standard test solutions

Putere: 100 - 240 VAC, 50/60 Hz
Max. power consumption: 120 VA

Reagent Requirements: Keep between 10 - 30 °C

Scurgere: Atmospheric pressure, vented, min. Ø 32 mm

Temparatura ambiantă: 10 - 30 °C ± 4 °C deviation at 5 - 95% relative humidity (non-condensing)

Temperatura probă: 10 - 30 °C

Validation: Automatic; frequency freely programmable