Tipărire

EZ1035 Silica Analyser (HR)

Nr. produs: EZ1035.XXXXXXXX

Preț unitar Contact

EZ1035 Silica Analyser, Instruction Manual, 1 x Double Bit Door Key, 1 x Mounting Brackets and 3 x empty 2.5L Reagent Containers with Fittings (for Colour, Oxalic Acid, Reducing)

Alarma: 1 x malfunctioning, 4 x user-configurable, max. 24 VDC/0.5 A, potential free contacts

Alimentare electrică: 100 - 240 VAC, 50/60 Hz

Calibrare: Automatic, 2-point; frequency freely programmable

Calitate proba: Maximum particle size 100 µm, < 0.1 g/L; Turbidity < 50 NTU

Certiﬁcări: CE compliant / ETL certified

Clasa de protectie: Protection class: Analyser cabinet: IP44 / Panel PC: IP65

Conţinutul cutiei: EZ1035 Silica Analyser, Instruction Manual, 1 x Double Bit Door Key, 1 x Mounting Brackets and 3 x empty 2.5L Reagent Containers with Fittings (for Colour, Oxalic Acid, Reducing)

Curatare automata: Da

Cuve: 10 min (dilution + 5 min.)

Debitul probei: 100 - 300 mL/min

Demineralised water: For rinsing / dilution

Digital outputs: Optional: Modbus (TCP/IP, RS485)

Dimensiuni (Înălţime x Lăţime x Adâncime): 690 mm x 465 mm x 330 mm

Domeniu de măsurare: 0 - 1 mg/L Si

0 - 1 mg/L Si

Optional:
0 - 100 µg/L
0 - 250 µg/L
0 - 500 µg/L
0 - 4 mg/L (with internal dilution)
0 - 8 mg/L (with internal dilution)
0 - 100 mg/L (with internal dilution)

Earth connection: Dry and clean earth pole with low impedance (< 1 Ohm) using an earth cable of > 2.5 mm²

Esantion: presiune: By external overflow vessel

Garanţie: 24 luni

Greutate: 25 kg

Iesiri analogice: Active 4 - 20 mA max. 500 Ohm load, standard 1, max. 8 (option)

Instrument air: Dry and oil free according to ISA-S7.0.01-1996 quality standard for instrument air

Interferente: Tannin, large amounts of Iron, Sulphide and Phospate interfere. Large amounts of colour and turbidity interfere. Fats, oil, proteins, surfactants and tar.

Limita de detecţie: ≤ 10 µg/L

Material: Hinged part: Thermoform ABS, door: PMMA
Wall section: galvanised steel, powder coated

Metoda de măsurare: Colorimetric measurement at 630 nm using molybdate, conform with standard method ASTM 4500-SiO2-C

Model: EZ1035

Nr. flux probe : 1, 2, 4, or 8

Parametru: Silica

Precizie: Better than 1% full scale range for standard test solutions

Putere: 100 - 240 VAC, 50/60 Hz
Max. power consumption: 120 VA

Reagent Requirements: Keep between 10 - 30 °C

Scurgere: Atmospheric pressure, vented, min. Ø 32 mm

Temparatura ambiantă: 10 - 30 °C ± 4 °C deviation at 5 - 95% relative humidity (non-condensing)

Temperatura probă: 10 - 30 °C

Validation: Automatic; frequency freely programmable