Modul de sondă SC1000 pentru 4 senzori, 4 IEȘIRI de 4-20 mA, Prognosys, 100-240 V c.a., cablu de alimentare fără fir

Modul de sondă SC1000 pentru 4 senzori, 4 IEȘIRI de 4-20 mA, Prognosys, 100-240 V c.a., cablu de alimentare fără fir
Nr. produs: LXV400.99.0G121
Preț unitar Contact
Expediere în 1 săptămână

More confidence in your instrument’s performance

Available exclusively on the SC1000, Prognosys predictive diagnostics uses patented multivariable diagnostic software to read multiple inputs from your instrument and alert you to the instrument's overall performance. An easy-to-read dashboard provides instant indication of measurement reliability and service requirements.

Plug and Play operation

There’s no complicated wiring or set up procedures with the SC1000 controller. Plug any Hach digital sensor into a Probe Module and it’s ready for use. No special ordering or software configuration is needed.

Communication options to fit any application need

The SC1000 controller features state-of-the art Modbus TCP/IP communications protocol for seamless integration into a network of devices that support TCP/IP sockets. Use a standard Ethernet cable or connect wirelessly using GSM/GPRS to communicate with your SCADA, PLC or other network. The SC1000 also offers up to 12 analogue outputs for measured values and up to 12 analog or digital values from non-digital sensors.

Expandable and upgradable

The SC1000 Controller can adapt to your needs. Add or change probes without having to change the controller. Plus, with a single Display Module, additional Probe Modules and associated sensors can be added or removed depending on operational needs. Fully upgradable software ensures that this system will not be obsolete. Hach service plans are available.

Conţinutul cutiei

SC1000 Probe Module with installed cards (as requested), Basic User Manual

Specificaţii

Alarma: Low alarm point, low alarm point deadband, high alarm point, high alarm point deadband, off delay, and on delay
Analog Output: One 4-20 mA Output Module
Analogue inputs: No Input Module
Capacitati de comunicare: None
Carcasă impermeabilă (IP) : IP65
Certificări: European Certifications:
CE per 73/23/EEC and 89/336/EEC
TUV-GS to EN 61010-1
EN 61326 Amd's 1 & 2
Comunicare: MODBUS (RS485): Advanced communications/networking with PLC or SCADA system directly from analyzer
PROFIBUS DP/V1 (certified)
GSM/GPRS Quad-band cellular module (FCC and IC approved, EU and US only)
Ethernet service port, RJ45, 10 MB/s
Condiții de depozitare: -20 - 70 °C / 0 - 95% relative humidity, non-condensing
Condiții de operare: -20 - 55 °C / 0 - 95% relative humidity, non-condensing
Conduit for Relay Connection: Nu
Conţinutul cutiei: SC1000 Probe Module with installed cards (as requested), Basic User Manual
Dimensiuni (Înălţime x Lăţime x Adâncime): 250 mm x 315 mm x 150 mm
Garanţie: 24 luni
Greutate: Approximately 6.5 kg (depending on configuration)
Ieşire: Up to 12 analog 0/4-20 mA, maximum impedance 500 Ohms per probe module.

Additional analog outputs with additional probe modules. Optional digital communcations via Modbus® (RS485) and Profibus® DP/V1.
  Up to 12 analog 0/4-20 mA, maximum impedance 500 Ohms per probe module.

Additional analog outputs with additional probe modules. Optional digital communcations via Modbus® (RS485) and Profibus® DP/V1.
Iesiri analogice: PID, high/low phasing, setpoint, deadband, overfeed timer, off delay, on delay
Intrari: Up to 12 analogue 0-20 mA, maximum impedance 500 Ohms per probe module. Additional inputs are available with additional probe modules.
Material: ABS (display module) and metal (probe module) enclosure with corrosion resistant finish
Modalitate de montaj: Suprafaţă, panou şi conductă (orizontală şi verticală) cu parasolar opţional
Monitor: ¼ inch VGA graphical backlit TFT color Glas/Glas-Touch screen, high resistance 320 x 240 pixels
Opțiuni de alimentare: 100 - 240 VAC, fără cablu de alimentare
Prognosys: Da
Relee: No Relay
RTC Module: Nu
Senzor: 4
Zona vizualizare ecran: 11.4 x 8.6 cm